A1000
63
532210 04 - Rev.A
Tr
ansla
tion of the original instruc
tions
ENGLISH
14.2 INPUTS CONFIGURATION
Inputs refers to managing the connection with the closing and
opening safety devices and the opening activation devices, safety
devices and other devices that can be activated on inputs I1, I2,
activated on inputs I1, I2,
I3 and I4
I3 and I4
70
70
S1,S2,E1,E2
S1,S2,E1,E2 and selectable as NO or NC
and selectable as NO or NC contacts.
(NC only from SDKEVO).
(NC only from SDKEVO).
Input DISABLED (no)
Input DISABLED (no)
the input is NOT considered in this mode.
ALWAYS OPEN operating mode input (40)
ALWAYS OPEN operating mode input (40)
--
When the input is active, it forces an ALWAYS OPEN operating
When the input is active, it forces an ALWAYS OPEN operating
mode to be set.
mode to be set.
--
When the input is deactivated, it forces a TOTAL TWO-DIRECTION
When the input is deactivated, it forces a TOTAL TWO-DIRECTION
AUTOMATIC operating mode to be set.
AUTOMATIC operating mode to be set.
EXTERNAL OPEN input (1)
--
With the active input
With the active input configured in this way, the leaves must
open and remain open as long as the input is active.
--
If this input is deactivated
If this input is deactivated, the pause time elapses and the leaves
close again.
-
the ENERGY SAVING mode can be activated on this input.
-
this input is NOT considered in NIGHT-TIME or EXIT ONLY modes.
-
activation of this input lights up the OPEN green LED on the
board.
TOTALAUTOMATIC
TOTALAUTOMATIC
ONE-DIRECTIONAL
mode input
mode input ONLY
OUTPUT (41)
OUTPUT (41)
--
When the input is active, it forces an
When the input is active, it forces an EXIT ONLY operating mode
to be set.
--
When the input is deactivated, it forces a
When the input is deactivated, it forces a TWO-DIRECTIONAL
operating mode to be set.
TOTAL AUTOMATIC
TOTAL AUTOMATIC ONE-DIRECTIONAL mode input ONLY INPUT (42)
mode input ONLY INPUT (42)
--
When the input is active, it forces an
When the input is active, it forces an ENTRY ONLY operating
mode to be set.
--
When the input is deactivated it forces a
When the input is deactivated it forces a TWO-DIRECTIONAL
operating mode to be set.
AUTOMATIC OPEN input (7)
--
With the active input
With the active input configured in this way, the leaves must
open and remain open as long as the input is active.
--
When the input is deactivated
When the input is deactivated, the pause time elapses and the
leaves close again.
-
the ENERGY SAVING mode CANNOT be activated on this input.
-
this input is NOT considered in NIGHT-TIME mode
-
activation of this input lights up the OPEN green LED on the
board.
SEMI-AUTOMATIC OPEN input (8)
--
With the active input
With the active input configured in this way, the leaves must
open and remain open.
-
the ENERGY SAVING mode CANNOT be activated on this input.
-
the TOTAL or PARTIAL function can be selected on this input.
-
this input is NOT considered in NIGHT-TIME mode
-
activation of this input lights up the OPEN green LED on the
board.
PHARMACY OPEN input (9)
--
With the active input
With the active input configured in this way, the operation is as
follows:
1. In normal operation it is AUTOMATIC OPEN function
2. In NIGHT-TIME function the leaves open in the percentage selected
and after the pause time the leaves close again.
-
activation of this input lights up the OPEN green LED on the
board.
KEY input (10)
-
in NIGHT-TIME mode the input is active and has the same function
as AUTOMATIC OPEN.
--
With the active input
With the active input of an input configured in this way, during
NIGHT-TIME function the leaves must open and remain open as
long as the input is active.
--
With the active input
With the active input of an input configured in this way, during
normal operation the leaves must open and remain open as long
as the input is active.
--
If this input is deactivated
If this input is deactivated, the night pause time elapses and the
leaves close again.
-
the ENERGY SAVING mode CANNOT be activated on this input.
-
activation of this input lights up the OPEN green LED on the
board.
CLOSING SAFETY input (20)
--
With the active input
With the active input of an input configured in this mode, the
functions are as follows:
1. during a closing motion the leaves are inverted.
2. with the leaves open closure is prevented
3. the time selected is reapplied if in a pause status
-
if selected on the input, a TEST procedure is run before a closing
motion.
--
Deactivating this input
Deactivating this input immediately closes the leaves again if
the ENERGY SAVING function is active; otherwise the leaves close
again after total or partial opening.
-
activation of this input lights up the SIC_CL red LED on the board.
OPENING SAFETY input (21)
The operation of this input depends on parameter Ot
11
1. with OPENING SAFETY in STOP the motion is stopped (status
11) and this status remains until the safeties on opening are not
disengaged.
2. with OPENING SAFETY in LOW ENERGY the motion proceeds slowly
until fully opened.
-
If the test is enabled, the device is checked to make sure that it
is working before an opening movement.
-
In NIGHT-TIME function activation of an input configured in this
mode during opening stops the motion. If this operation is not
completed due to active safeties in opening, it will wait until it
can be completed, but if this cannot happen because the night-
time pause time set is exceeded, the leaves return to the closed
position.
-
activation of this input lights up the SIC_OP red LED on the board.
INTERNAL OPEN input (4)
--
With the active input
With the active input configured in this way, the leaves must
open and remain open as long as the input is active.
--
If this input is deactivated
If this input is deactivated, the pause time elapses and the leaves
close again.
-
the ENERGY SAVING mode can be activated on this input.
-
this function is NOT activated in NIGHT-TIME mode except the
interval of time for switching to NIGHT-TIME FUNCTION.
-
activation of this input lights up the OPEN green LED on the
board.
OPENING EMERGENCY input WITHOUT MEMORY (30) AND WITH MEMORY (31)
OPENING EMERGENCY input WITHOUT MEMORY (30) AND WITH MEMORY (31)
--
With the input active,
With the input active, the leaves open
-
The Emergency priority order is as follows: Open , Stop , Close.
-
The input configured as OPENING EMERGENCY
OPENING EMERGENCY behaves differ-
ently depending on whether it is programmed with or without
memory:
1. without memory, once the input is no longer active, the leaves no
longer remain Open and return to their previous status.
2. with memory, once the input is deactivated the leaves remain
Open until the RESET command is given.
-
Opening is always TOTAL.
EMERGENCY STOP input WITHOUT MEMORY (32) AND WITH MEMORY (33)
EMERGENCY STOP input WITHOUT MEMORY (32) AND WITH MEMORY (33)
--
With the input active,
With the input active, the leaves remain stationary.
-
The Emergency priority order is as follows: Open , Stop , Close.
-
The input configured as EMERGENCY STOP
EMERGENCY STOP behaves differently de-
pending on whether it is programmed with or without memory:
1. without memory, once the input is no longer active, the leaves no
longer remain in Stop status and return to their previous status.
2. with memory, once the input is deactivated the leaves remain in
Stop status until the RESET command is given.
Содержание A1000
