Command access SLP-UL-M-KIT Installation Instructions Manual Download

Page: 1 / 6

SLP-UL-M-KIT

Doc # 20094_E

I N S T A L L A T I O N I N S T R U C T I O N S

Visit our website for more details

www.CommandAccess.com

U.S. Customer Support

1-888-622-2377

Canada Customer Support

1-855-823-3002

Kit Includes

1- Motor Mount Assembly w/ MM4S series module

2 -Phillips Screws

1 - Push & Go Connector

D. 1- MM4S switch program sticker

1 - 5/64” Hex Wrench

1 - 5/32” Drill Bit

G. 1 - 8’ Lead w/ VD Connector

Tools Required

• Power Drill

The Command Access SLP-UL-M-KIT is a field installable motorized latch-pullback kit for the

Sargent 80 series.

Scan or Click here

Installation Video

Summary of Contents for SLP-UL-M-KIT

Page 3: ...NTROL SYSTEM NO VOLTAGE LOCKING HARDWARE CAT Electrified Exit Device Installation Example Recommended Power Supplies All Command Access exit devices field installable kits have been thoroughly cycle tested with Command Access power supplies at our factory For more information click here or go to our website ...

Page 4: ...STEP 1 Disassemble Exit Device A Remove End Cap Filler Plate B Remove 4 screws from baserail C Partially slide push pad off approx 2 3 D Using 5 32 drill bit Open up the 2 back screw holes 3 4 ...

Page 5: ...STEP 2 Install Motor Mount A Attach the link assembly to the end of the activating bracket Next place activating bracket into center of the motor mount C Re install metal rod securing activating bracket to motor mount B Secure link assembly to activating bracket with Hex wrench provided Activating Bracket Metal Rod AB Mount Link Assembly Baserail ...