background image

Detex Corporation,  302 Detex Drive,  New Braunfels,  Texas  78130-3045

830-629-2900  /  800-729-3839  /  Fax 800-653-3839  /  Text photos only: 830-481-6433  /  INTERNET: www.detex.com

104889   March 18, 2020               C

104889   Page 1

For device installation videos,

scan code below or

go to www.detex.com/videos

Page

 2
 3
 4
 4-5
 5
 6
 6-7
 7-8
 8

Table of Contents

Parts breakdown view & part numbers.........................................................
Hardware list, Device preparation.................................................................

Switch selector positions, Door mounting procedure....................................

Wall mounting procedure, Multi-door & SK procedure..................................

Device installation (finish)..............................................................................
Key Stop installation, Optional accessories..................................................

Special notes & definitions, Magnet handing & re-handing, operations........
Change door prop timiing..............................................................................
Operations continued, Troubleshooting.........................................................

Dwg #: 105830

INSTALLATION INSTRUCTIONS FOR THE EAX-300 DOOR PROP / DOOR CHIME (EAX-300 / 300W / 300SK)

The Detex EAX-300 is designed for applications that require a door prop alarm device on secured doors. The alarm,
with approximately 100dB, will sound when someone attempts to keep the door open beyond the selected time.
The EAX-300, with it's smaller size makes it the choice for quick and easy installations on emergency exit and restricted doors.

For WARRANTY information,

scan code below or

go to www.detex.com/warranty

Should you have any Question/Problem with your Detex device please call Detex Technical Support from the

job site at 1-800-729-3839 and choose option 2 on our menu. Please do not return the product to the distributor.

Summary of Contents for EAX-300 Series









Reviews: