FAAC A1000, Руководство пользователя

Страница: 77 / 116

A1000 77 532210 04 - Rev.A
74
75
J8
E1SL
LK EVO
8
TX RX G K G V

V
V RX
RX
TX
TX
G
G
U/UTP CAT.5
4x2xAWG24

V RX TX G
7
TX RX G K G V
Tr
ansla
tion of the original instruc
tions
ENGLISH
18. LK EVO
fw version 1.2 or later fw version 1.2 or later
18.1 ASSEMBLY AND TESTING
1. To separate the LK EVO , use a flat screwdriver to prise apart the
points
74
- .
2. Break off the cable knockout.
3. Mark the points on the wall
74
- and fasten the support using
suitable screws.
F
BEFORE CONNECTING THE DEVICE, disconnect the power supply and the
emergency battery of the automation.
4. Connect the E1SL board
74
-
5. The connection must be made using a 4-pair twisted cable
U/UTP CAT.5 4x2xAWG24
with a 0.5 mm section
74
- . The
maximum distance is 50 m.
6. Assemble the LK EVO by pressing lightly at the points
74
- .
 
* An optional connection can be made to terminals G and K on the LK EVO
with a key command to lock the function keys. With an NC contact, the
keypad is locked
74
- .
TOTAL TWO-DIRECTION AUTOMATIC
DOOR OPEN
AUTOMATIC TOTAL
ONE-DIRECTIONAL
AUTOMATIC PARTIAL
TWO-DIRECTIONAL
NIGHT
MANUAL
18.2 SELECTION MENU
1. To access the operating mode selection menu, press the cor-
responding function button.
2. The following functions may be set with the selection buttons:
- TOTAL TWO-DIRECTION AUTOMATIC
- DOOR OPEN
- AUTOMATIC TOTAL ONE-DIRECTION
- AUTOMATIC PARTIAL TWO-DIRECTION AUTOMATIC
- NIGHT
- MANUAL
3. The LED switches on to identify the active function.
4. To switch to another function press the key corresponding to
the new function.
5. If the LK EVO is connected to an A1000 board in which an unin-
tended function has been programmed, it is overridden with a
different function as indicated: