EZ EZ-220, Руководство по оборудованию

Страница: 38 / 150

34
EZ-TEXT-M-E
Text Panel Hardware Manual
PLC CONTROLLED DECIMAL POINT (16-Bit Register)
This is a register in the PLC for controlling a decimal point within an embedded
data value (DATA 1 only). One register holds the value and the other controls
the decimal point. The register addresses are assigned from the
Message
Edit screen as shown above. No ASCII characters are allowed in DATA 1 with
a PLC controlled decimal point.
DATA 2 (16-Bit Register, READ ONLY )
This is a PLC register that contains the second of three possible embedded data
values on a line for the message displayed. You may
manually insert a decimal
point. The PLC Address and Data Typ e are assigned from the Message Edit
screen, shown above.
DATA 3 (16-Bit Register, READ ONLY )
This is a PLC register that contains the third of three possible embedded data
values on a line for the message displayed. You may
manually insert a decimal
point. The PLC Address and Data Typ e are assigned from the Message Edit
screen, shown above.