EZ EZ-220, Руководство по оборудованию

Страница: 6 / 150

2
EZ-TEXT-M-E
Text Panel Hardware Manual
This manual is all you’ll need to get the EZSeries Set Point Display Set Point
Display Panel installed and confi gured. This manual covers models EZ-220,
EZ-420, EZ-220L, EZ-220P, and two new models with Vacuum Fluorescent
Display EZ-220V, EZ-220PV.
In this manual we will take you through the steps necessary to get your EZSeries
Set Point Display Set Point Display Text Panel up and running in the shortest
possible time. Although your familiarity with programmable operator interface
devices will determine how quickly you move through the steps — it’s as easy
as 1 — 2 — 3. This manual is arranged in chapters. A description of key
Manual Organization
Chapter Description
1
2
3
4
Introduction
Provides Manual Organization, and lists what you need to get started, hard-
ware and software. Discusses how to get help with questions or problems you
might encounter through Onscreen Help and Technical Support. Provides you
with a table listing the various models, their part numbers and special fea-
tures. Lists the important features of all EZSeries Set Point Display Set Point
Display Panels. Lists the PLCs supported by the panels, by brand, model and
protocol. Lists the part numbers for PLC cables and the programming cable.
Tells how to install programming software.
Hardware Installation
Provides instructions on how to install custom labels and the EMI Noise Filter.
Discusses two mounting techniques — stud mounting and DIN clip mount-
ing. Provides Outline Dimensions and Mounting Template. Provides you with
instructions on connecting the unit to power, a programming PC and a PLC.
Learning the Features
Provides an Overview of the panel features. Front Panel Features, including;
Function Pushbuttons/LEDs, Character LCD Display, PLC Message LED and
Control Pushbuttons are discussed. Local and PLC Messages are described,
along with types of Messages and Embedded Data Variables (DATA 1, 2, and
3).
Tutorial
Provides instructions to create an example (or “demo”) project. Discusses
how to confi gure a PLC ladder logic program to use with the demo project.
Takes you through the steps necessary to create an EZSeries Set Point
Display Set Point Display Panel project using the programming software and
application worksheets. Shows you how to transfer a project to the panel.
Confi guration