EZ EZ-220, Руководство по оборудованию

Страница: 20 / 150

16 EZ-TEXT-M-E
Text Panel Hardware Manual
Create Custom Labels
You may create custom labels for the EZSeries Set Point Display Text Panel
Function Pushbuttons that are particular to their function within your applica-
tion. The labels slide into an existing slot in the panel overlay so that the text or
numbers you have printed will rest over the pushbuttons.
A Microsoft Word® document ( EZ-TEXT_INSERTS.doc) is installed in the
EZSeries Set Point Display Text Panel Program folder on your computer
when you installed your programming software. You must have Word
installed on your computer to open this document.
This document will help
you create your labels. Two sheets of cover stock have also been shipped with
your panel.
Custom Labels
Install Custom Labels
A 1/2-inch x 4-inch fl at metal tool ( ramp tool) is shipped with each unit to
aid in the installation of the label inserts
.
To install the pushbutton labels into the slots, perform the following steps.
1. Carefully remove rubber trim mold from panel front to access label
slots. (The trim has a barbed retaining rib that is pressed securely into
a channel in the front panel housing.) The ramp tool can be used to
help lift the trim (see illustration #1).