EZ EZ-220, Руководство по оборудованию

Страница: 48 / 150

44
EZ-TEXT-M-E
Text Panel Hardware Manual
SETUP Mode
In order to download the program to the
EZSeries Set Point Display Text Panel using
the EZSeries Set Point Display Text Panel
Programming Software, you must be in the
Setup Mode. Setup Mode is also where
you will
adjust the display contrast of the EZSeries Set Point Display Text
Panel.
The EZSeries Set Point Display Text Panel will start up in the RUN Mode. To
access the SETUP Mode, follow these steps:
1. Press the UP Arrow Pushbutton and hold while simultaneously pressing
the DOWN Arrow Pushbutton to enter the SETUP Mode.
2. At any time you may press the Escape ( esc ) button to go back to RUN
Mode. You will be taken back to the start of the Local Message menu
(cursor is placed at root level when you return from setup).
Adjust Display Contrast
You may only adjust the Display Contrast when in Setup Mode. To adjust the
display contrast use the UP and DOWN arrows to increase or decrease the
contrast.
Internal Software and Hardware Revisions
While in SETUP Mode the Panel Hardware Revision, Driver Revision, Boot
Revision, and Exec (Firmware) Revision numbers will display on the panel.
Preparing for Confi guration
If you prepare and plan ahead of time, your use of the EZSeries Set Point Display
Text Panel Programming software will be successful. Below are a few important
steps to take to prepare to program your application.
•
Prepare your personal computer and ensure proper installation of
the EZSeries Set Point Display Text Panel Programming Software
•
Know your operator interface requirements. Determine the type of
EZSeries Set Point Display Text Panel and the number of EZSeries
Set Point Display Text Panels required by your application
•
Know your PLC type and available resources, such as, programming
tools, CPU capabilities, user memory, etc.
•
Verify type of communications port, as well as protocol used.
Determine the CPU link(s) available for connecting an EZSeries Set
Point Display Text Panel
EZSeries Set Point Display Text Panel Setup
SETUP MODE
DRV. REV.: