EZ EZ-220, Руководство по оборудованию

Страница: 49 / 150

45 EZ-TEXT-M-E
Text Panel Hardware Manual
(RS-232/RS-422, baud rate, parity, stop bits.)
•
Determine how the pushbuttons, LEDs, PLC Messages, and Local
Messages will be assigned in your panels with respect to your
machine or process.
•
To prepare your application, use the application worksheets provided
in appendix A of this manual. The example worksheets will help
you understand how the EZSeries Set Point Display Text Panel
program is confi gured. Blank worksheets can be used in planning,
implementing, and using your EZSeries Set Point DisplaText Panels.
Installing EZSeries Set Point Display Text Panel
Programming Software
EZSeries Set Point Display Text Panels are confi gured with software running
on an IBM or compatible personal computer. This software is available
through EZAutomation, part number EZ-TEXTEDIT-E. The software is used to
download your confi guration before connecting the panel and communicating
with a PLC. Help Topics are provided to help you configure your panel.
You design and configure your EZSeries Set Point Display Text Panel
program off-line and save it to disk. The program may then be transferred
to the EZSeries Set Point Display Text Panel. To install EZSeries Set Point
Display Text Panel Programming Software, perform the following steps:
• Place the CD into your CD ROM Drive.
• From Windows click on the Start Button, and then click on
Run from the menu. The Run dialog box will pop up.
• At the prompt type D:\ (or your CD Drive)\setup.exe or click
on the Browse Button and fi nd the Setup.exe fi le for
EZSeries Set Point Display Text Panel Programming
Software.
• Click on the OK button to begin the installation. The
EZSeries Set Point Display Text Panel Programming
Software Installation Screen will appear.
• Follow the onscreen prompts to load the software.