EZ EZ-220, Руководство по оборудованию

Страница: 73 / 150

69 EZ-TEXT-M-E
Text Panel Hardware Manual
— PLC Button Release Bits use Bit 10 through Bit 14 (Octal)
or Bit 8 through Bit 12 (Decimal). If the button is ON, the
PLC can release the button by setting the corresponding
release bit.
— Panel Acknowledge of PLC Release Bits use Bit 10
through Bit 14 (Octal) or Bit 8 through Bit 12 (Decimal). The
panel turns ON these bits to acknowledge the PLC Release
Bits.
12. Enter a LED (Bit Read) PLC Word and a Buttons (Bit Write) PLC
Word address.
13. Click on OK to save your Button/LED control selections.
14. Now you are ready to confi gure Local and PLC Messages . Click on
the Message button (as shown to the right). The following screen will
appear.
19. For Step 1 , choose to confi gure a Local or PLC Message. Local
Messages are messages stored in the panel in a menu hierarchy and
provide information and instructions to the operator. PLC Messages
are triggered by a value in a PLC register. The PLC Message LED will
illuminate to tell the operator that the PLC has triggered a message.
The buttons will not respond for 3 seconds after the PLC Message has
been triggered to ensure that the operator has a chance to read the