EZ EZ-220, Руководство по оборудованию

Страница: 139 / 150

C-19
Text Panel Hardware Manual
AROMAT PLC WITH MEWTOCOL COM PROTOCOL
Error 0: NO_ERROR
Screen Message: N/A
Condition: NEVER WILL OCCUR
Error 1: INVALID_ATTRIBUTES
Screen Message: INVALID PLC ATTRIBUTES - USING DEFAULTS
Condition: If attributes do not exist or there are less than the original
number of attributes.
Error 2: MSG_ERR
Screen Message: INVALID PLC RESPONCE: Txxxxx[,xxx][/BB]
Condition: The Driver did not receive the reply from the PLC that it
expected.
Error 3: PLC_TIMEOUT
Screen Message: PLC TIMEOUT
Condition: The Driver did not receive a reply to a message in the allowed
time.
Error 4: BCC_ERR
Screen Message: CHECKSUM ERROR
Condition: Command string was not sent from the Panel to the PLC
correctly, or the checksum in the message was incorrect.
Error 5: FMT_ERR
Screen Message: FORMAT ERROR
Condition: Command string was missing characters or some were
incorrect.
Error 6: NOT_ERR
Screen Message: NOT SUPPORT ERROR
Condition: Command from Panel does not exist on the PLC.
Error 7: PRO_ERR
Screen Message: PROCEDURE ERROR
Condition: Command was sent to the PLC while it was still processing an
existing command.
Error 8: WRONG_STN_ERR
Screen Message: WRONG STATION REPLIED TO MSG
Condition: The received message contained a different station number from
the message the driver sent.
Error 9: CSUM_ERR
Screen Message: INCORRECT CSUM FROM PLC
Condition: The received message from the PLC had a bad checksum.
Error 10: INVALID_DRIVER_STATE
Screen Message: INVALID DRIVER STATE
Condition: NEVER SHOULD OCCUR.