Extron electronics TouchLink TLP Pro 525C NC Скачать руководство пользователя страница 21

Страница: 21 / 51

Mounting

This section outlines the various options for:

•

Planning

•

Tools Required for Installation

•

Included Parts

•

Ensuring Adequate Under-table Clearance for Retractors

•

Cutting the Table

•

Running Cables

•

Preparing MAAP or AAP Modules

•

Preparing Cable Pass-through Modules

•

Installing Modules

•

Mounting the Touchpanel Enclosure

•

Installing Cable Retractors (Optional)

Planning

Before making any cuts, select the best location for the touchpanel.

Ensure that the edge that opens on the lid is oriented correctly.

Ensure there is enough space for all the system cables and components, above and
below the table. Take account of:

•

Clearances for under-table cabling, especially if the cable has a large bend radius.

•

Adequate space below the table for cable retractors if they are to be installed (see
see

Ensuring Adequate Under-table Clearance for Retractors

on page 13).

•

The number and type of AAPs required for the installation.

•

The location of devices that connect to the AAPs either above or below the table.

Verify that you have the correct template or dimensions (see

Cut-out Dimensions

page 15).

Decide on the method for cutting a hole in the table (see

Cutting the Surface

page 15). There are three methods available:

•

Hand router and guide

(see page 16) — requires a router template, which must be

purchased separately.

•

CNC wood router

(see page 16) — must be programmed with the correct

dimensions.

•

Reciprocating saw or jigsaw

(see page 16) — requires a paper template (available

www.extron.com

The hand router used with the routing template or the CNC wood router are the most
accurate methods for cutting the hole. Either one of these methods is recommended by
Extron. The jigsaw is less accurate, but is also acceptable.

Check all relevant regulations.

Ensure that the installation complies with local, state, and national building and electrical
codes.

Ensure that the installation complies with the Americans with Disabilities Act or other
accessibility requirements.

TLP Pro 525C and 725C Series Touchpanels • Mounting

Содержание TouchLink TLP Pro 525C NC




















































Результаты поиска

Содержание TouchLink TLP Pro 525C NC

Отзывы:

Похожие инструкции для TouchLink TLP Pro 525C NC

Бренды по названию

Популярные бренды

Extron electronics TouchLink TLP Pro 525C NC, Руководство пользователя

Результаты поиска

Содержание TouchLink TLP Pro 525C NC

Отзывы:

Похожие инструкции для TouchLink TLP Pro 525C NC

Бренды по названию

Популярные бренды