background image

Installing Modules

Several types of modules can be installed in either touchpanel Cable Cubby. However, the 
installation procedures are different, depending on modules and the touchpanel enclosure.
Each 525C module, which can be used only by the TLP Pro 525C series, can contain one of the 
following:

• 

Up to two MAAPs

• 

Up to five pass-through cables

• 

Up to two retractors

The following Series/2 modules can be used by both the TLP Pro 525C and TLP Pro 725C 
series touchpanels.

• 

Cable Cubby AC or AC + USB power modules. Power modules must be purchased 
separately. See the Extron website (

www.extron.com

) to select a power module that is 

suitable for your location.

• 

Retractor Triple Bracket, accommodating up to three retractors

• 

Series/2  Connectivity Brackets, accommodating up to three AAPs or eight pass-through 
cables.

• 

Cable Quad Brackets accommodating up to four pass-through cables.

TLP Pro 525C

The 525C modules must be installed at the ends of the TLP Pro 525C enclosure.
Extron recommends either of the possible configurations shown in figure 16, although several 
other configurations are possible.

e

e

AC Power  525C Module

Cable Quad Brackets (2) + 525C Module

Figure 16. 

Recommended Module Configurations in the TLP Pro 525C

 

TLP Pro 525C and 725C Series Touchpanels • Mounting

19

Содержание TouchLink TLP Pro 525C NC




















































Отзывы: