Installing a Series/2 AC, AC + USB, or Connectivity module
Figure 18 shows how to install a power module in the TLP Pro 525C. Other Series/2 Connectivity
modules are installed in a similar way.
If you are installing Series/2 Connectivity modules, they should be assembled in advance (see
see
on page 17, or see
CAUTION:
Risk of electric shock:
To ensure proper electrical grounding, use the
provided grounding screws and star washers.
ATTENTION :
Risque de décharge électrique:
Afin d’assurer une mise à la terre
correcte, utilisez les fixations de mise à la terre et les rondelles en étoile fournies.
1.
Slide the module into the enclosure from
underneath (
1
). Ensure the mounting holes
on the module are aligned with the holes on
the front of the enclosure.
2.
Secure the module with the provided #6-32
screws and #6 star washers (
2
).
e
21-
525
-01
LF
21-
525
-01
LF
21-
526
-01L
F
21-
526-01L
F
TOP
125V
50-6
0Hz 1
2A M
AX TO
TAL
~
Slide the module
into the enclosure
as shown
(either side).
1
Secure the module
with the included
screws and washers.
2
Figure 18.
Installing a Power Module in the
TLP Pro 525C
TLP Pro 525C and 725C Series Touchpanels • Mounting
21
