IN1608 xi Scaling Presentation Switcher • SIS Configuration and Control
48
Password Information
The
]
Password:
prompt requires a password (administrator level or user level) followed
by a carriage return. The prompt is repeated if the correct password is not entered. If the
correct password is entered, the unit responds with
]
Login
Administrator
]
or
]
Login
User
]
, depending on password entered. If passwords are the same for both
administrator and user, the unit defaults to administrator privileges.
Error Responses
When the scaler receives a valid command, it executes the command and sends a
response to the host device. If the unit is unable to execute the command, it returns an error
response to the host.
Error codes
E01
— Invalid input number
E17
— Invalid command for signal type
E10
— Invalid command
E22
— Busy
E11
— Invalid preset number
E24
— Privilege violation
E12
— Invalid port number
E25
— Device not present
E13
— Invalid parameter
E26
— Maximum number of connections
exceeded
E14
— Not valid for this configuration
E28
— Bad filename or file not found
Error response references
These references in the command and response tables note particular error responses to
that command.
14
= Commands that give an
E14
(invalid command for this configuration) error if sent to a
product whose current configuration does not support the command
24
= Commands that give an
E24
(privilege violation) error if not administrator level
28
= Commands that may give an
E28
(file not found) error
