Extron electronics IN1608 xi IPCP MA 70, Руководство пользователя

Страница: 104 / 144

IN1608 xi Scaling Presentation Switcher • Internal Web Pages 96
The EDID properties currently assigned to each input are displayed in the list of inputs. The
audio input format listed in an EDID is determined by the audio input format selected on the
Audio Configuration
page (unless a custom EDID is used).
Audio Input Format Audio Capabilities Listed in EDID
None No audio
Analog No audio
LPCM-2Ch 2-channel audio
Multi-Ch Multi-channel audio
LPCM-2Ch Auto 2-channel audio
Multi-Ch Auto Multi-channel audio
If desired, the scaler can store up to eight custom EDID files. Audio settings from custom
EDID files take priority over current settings on the input.
NOTE: If an analog custom EDID file is assigned to a digital input or a digital custom
EDID file is assigned to an analog input, the display may not appear correctly.
EDID filters
Use the
Filter
tab to limit the number of available EDID displayed in the
Available EDIDs
and
Connected Outputs
panels.
1.
From the
Resolution
drop-down menu (see
figure 58
,
1
on the previous page),
select a specific resolution or
Any
.
2. From the
Refresh Rate
drop-down menu (
2
), select a specific refresh rate or
Any
.
EDID assignment
To assign EDID to selected inputs:
1. From the inputs group box (table of inputs) on the right, select the checkboxes for the
desired inputs (
6
).
2. From the
Available EDIDs
or
Connected Outputs
panel (
3
or
4
) on the left, select
the desired EDID.
3. From the inputs group box, click the
Assign
button (
7
) to assign EDID to the selected
input or inputs.
To assign EDID to all inputs:
1. From the
Connected Outputs
or
Available EDIDs
panel (
3
or
4
), select an EDID.
2. From the inputs group box, click the
Assign to All
button (
8
).
NOTE: Checked or unchecked inputs are ignored and the EDID is assigned to all
inputs.
To match the selected inputs to the current output resolution:
Matching the output resolution is the default value for all inputs.
1. From the inputs group box (table of inputs) on the right, select the checkboxes for the
desired inputs (
6
).
2. In the
Output Resolution
panel, click the
Match Output
button (
5
).