IN1608 xi Scaling Presentation Switcher • Introduction
6
•
Auto-Image setup
— When activated, causes the unit to automatically optimize the
image by analyzing and adjusting to the video input signal.
•
Auto Input Memory
— When activated, causes the unit to automatically store size,
position, and picture settings based on the incoming signal. When the same signal is
detected again, these image settings are recalled from memory.
•
Output Standby Mode
— The unit can be set to mute video and sync output to the
display device when no active input signal is detected. This allows the projector or
flat-panel display to automatically enter into standby mode to save energy and enhance
lamp or panel life.
•
Power Save Mode
— The unit can be placed in a low power standby state to
conserve energy when not in use.
•
Image freeze control
— A live image can be frozen using RS-232 serial control, USB,
or Ethernet control.
•
Picture controls for brightness, contrast, color, tint, detail, horizontal and
vertical positioning, and sizing
•
User presets
— Memory presets are available for each input to store and recall
optimized image settings.
•
Automatic 3:2 and 2:2 pulldown detection
— Advanced film mode processing
techniques that help maximize image quality for NTSC, PAL, and 1080i sources that
originated from film.
•
Quad standard video decoding
— A temporal, 3D adaptive comb filter provides
advanced decoding of composite NTSC 3.58, NTSC 4.43, PAL, and SECAM for
integration into systems worldwide.
•
Internal video test patterns and an audio pink noise generator for calibration
and setup
•
Front panel security lockout
— This feature locks out all front panel functions except
for input selection. All functions remain available through Ethernet, USB, or RS-232
control.
•
RJ-45 signal and link LED indicators for DTP ports
— Provides a means for
validating signal flow and operation, allowing quick identification of connectivity issues.
•
Rack-mountable metal enclosure
— The standard IN1608 xi features a 1U, full rack
width metal enclosure. Models with a built-in power amplifier or control processor are
housed in a 2U, full rack width metal enclosure.
•
Includes LockIt HDMI cable lacing brackets
•
Energy-efficient internal universal power supply
— The 100-240 VAC, 50-60 Hz,
international power supply provides worldwide power compatibility with high
demonstrated reliability.
Features of the IPCP Models
The IPCP models have an integrated three-port AV LAN switch to allow AV devices to be
isolated from the corporate network. These models include a built-in IPCP Pro control
processor for complete AV system control.
•
Support of Extron TouchLink Pro touchpanels and eBUS button panels
•
Integrated three-port AV LAN switch
allows AV devices to be isolated from the
corporate network.
•
Secure industry standard communications protocols,
including HTTP (not secure),
HTTPS, SSH, SFTP, SMTP, NTP, Discovery Service, DHCP, DNS, ICMP, and IPv4
•
Extron LinkLicense
enhances the capabilities of Extron Pro Series control systems.
