IN1608 xi Scaling Presentation Switcher • Introduction
4
•
Available with energy efficient Class D stereo or mono amplifier:
•
2 x 50 watts @ 4 ohms, 2 x 25 watts @ 8 ohms
•
1 x 100 watts @ 70 volts
— All IN1608 xi power amplifier options feature an
Extron advanced Class D amplifier design with Class D Ripple Suppression (CDRS),
an Extron patented technology that provides a smooth, clean audio waveform and
an improvement in signal fidelity over conventional Class D amplifier designs. CDRS
eliminates the high frequency switching ripple characteristic of Class D amplifiers,
a source of RF emissions which can interfere with sensitive AV equipment such as
wireless microphones.
•
Automatic clip limiter
— Detects onset of clipping, automatically reducing gain to
eliminate clipping and thereby protecting speakers and amplifiers from distortion.
•
Audio input gain and attenuation
— Gain or attenuation can be adjusted for each
audio input to eliminate noticeable differences when switching between sources.
•
Audio breakaway
— Provides the capability to break an analog audio signal away
from its corresponding video signal and route it to the audio outputs, allowing the
analog audio channels to be operated as a separate switcher.
•
Audio switching transitions
— The audio output level automatically ramps down and
then ramps up to match the video during switching transitions.
•
Integrated audio delay
— The audio output is automatically delayed to compensate
for latency introduced by the video processing.
•
Advanced audio configuration
— The IN1608 xi offers complete control of audio
input and output gain, attenuation, mixing, and ducking parameters via a user-friendly
GUI.
•
Input audio muting
— The analog stereo and HDMI audio inputs can be individually
muted.
Control Features
•
RS-232 insertion from the Ethernet control ports
— System level device control to
all remote locations via the switcher Ethernet ports.
•
Bidirectional RS-232 and IR insertion for AV device control
— Bidirectional
RS-232 control and IR signals can be transmitted alongside the video signal over DTP
connections, allowing the remote device to be controlled without additional cabling.
•
Ethernet monitoring and control
— Enables control and proactive monitoring over a
LAN, WAN, or the Internet. An intuitive web interface is included for full configuration of
the unit.
•
Built-in web pages
— Enables the use of a standard browser for full control and
troubleshooting over an intuitive web interface.
•
RS-232 control port
— Enables the use of serial commands for integration into a
control system. Extron products use the SIS command protocol, a set of basic ASCII
commands that allow for quick and easy programming.
•
Front panel USB configuration port
— Enables configuration without having to
access the rear panel.
•
Product Configuration Software
— PCS enables configuration of multiple products
using a single software application.
•
On-screen menus
— OSD menus allow for system setup using the front panel
controls.
