Table 6: Clock Module LED
Label/type
Color/State
Meaning
PWR
Steady green
3.3 V power OK
Off
No power
Table 7: F16T1E1 Module LEDs
Label/type
Color/State
Meaning
Local
(Alarm LED)
Steady green
Local alarm active
Blinking green
Local alarm active but silenced
Off
No local alarm active
Remote
(Alarm LED)
Steady green
Remote alarm active
Blinking green
Remote alarm active but silenced
Off
No remote alarm active
On-Line
Steady green
On line
Off
Off line
PWR
Steady green
Normal operation
Off
No power
Port LEDs (1 – 16)
Steady green
Link OK
Blinking green
Activity
Off
No link, or port is disabled
E4G-400 Cell Site Aggregation Router
The E4G-400 cell site aggregation router is a compact unit (1RU or 1.75 inches high) that enables
networks to aggregate multiple Ethernet links from various cell sites and route the traffic to the mobile
core.
The E4G-400 router provides 28 Gigabit Ethernet ports and port options for up to six 10-Gigabit
Ethernet ports, as well as a 16-port T1/E1 module with pseudowire capability. The T1/E1 module is used
where 2G and 3G radios are co-located at the aggregation site, and eliminates the need for separate cell
site routers.
The Gigabit and 10-Gigabit Ethernet ports on the E4G-400 router support Synchronous Ethernet
(SyncE) and IEEE 1588v2 timing. Integrated timing connectors on the front panel provide timing based
on either the ITU-T Synchronous Ethernet (SyncE) protocol or the Precision Time Protocol based on
IEEE specification 1588v2. Four mini-BNC connectors providing Sync In/Sync Out timing interfaces and
an RJ-422 connector provides a BITS-IN interface.
The E4G-400 router has 4 shared ports. For each pair of shared ports, either the 10/100/1000BASE-T
port (RJ45) or 100/1000BASE-X (SFP) port can be used as needed.
Extreme Networks E4G Series Routers
E4G Routers Hardware Installation Guide
14
