Figure 3: E4G-200 Clock Module
1 = LED
3 = BITS IN interface
2 = Sync In/Sync Out interfaces
E4G-200 F16T1E1 Module
The F16T1E1 module for the E4G-200 router provides 16 T1/E1 ports implemented as RJ-45 connectors.
These ports support circuit emulations over industry-standard pseudowires, allowing the transformation
of TDM cell sites to Ethernet/IP/MPLS cell sites. T1/E1 modules can be installed or removed without
powering down the router, although a system reboot is required to initialize the module.
Figure 4: E4G-200 F16T1E1 Module
1 = LEDs
2 = T1/E1 ports
E4G-200 LEDs
The following tables describe the LEDs on the E4G-200 cell site router (models E4G-200 and
E4G-200-12x).
Extreme Networks E4G Series Routers
E4G Routers Hardware Installation Guide
12
