Extraflame 001282600, Руководство пользователя

Страница: 18 / 40

ENGLISH
remote Control
The remote control allows you to adjust all the functions that are normally possible with the LCD display.
The various functions are outlined in detail in the table below:
INFO
1
2
3
4
5
6
7
8
9
10
11 12 13
14
15
16
1 on/off Prolonged pressure turns the stove on or off.
2 power inCrease
increases operating power
3 power deCrease
Decreases operating power
4 t° inCrease
increases the seT THermOsTaT.
if included with the model, prolonged pressure enables/disables the
comfort function.
5 t° deCrease
Decreases the seT THermOsTaT.
6
enaBles/disaBles
Chrono
enables/disables chrono
7 1h Not in use
8 menu
access user menu
9 inCrease increases the value displayed
10 esC key exit any program or view, returning to start menu without saving data.
11 BaCk
goes back in display of the various menus
12 Confirm key
Confirms adjustments made during user menu programming stage
13 forward goes forward in the various menus
14
enaBle f1
funCtion
Key pre-configured for future applications
15 deCrease Decreases the value displayed
16 stove status Displays the general status of the stove
Battery type and replaCement
The battery is housed in the lower part of the remote control.
To replace it, extract the battery holder, remove or insert the battery following the symbols printed on the remote control and the battery.
One 3V Cr2025 lithium coin battery is required to operate the remote control.
Used batteries contain metals that are harmful to the environment, and therefore must be disposed of separately in special containers.
NB: the numbers shown on the remote control are for information purposes and are not on the remote control supplied with the stove.
if the remote Control is switChed off due to no Battery installed, the stove Can Be Controlled from the
Command panel loCated on the upper part of the stove. when ChanGinG the Battery, make sure you follow
the symBols printed on the inner slot of the remote Control.
J
make sure that the Bottom of the Burn pot is free from residue
and deposits. the holes at the Bottom must Be Completely
free to Guarantee CorreCt ComBustion. it is possiBle to
use the funCtion "
EASY SETUP " to adapt ComBustion to the
requirements desCriBed.
BUrN POT Base
18