Extraflame 001282600, Руководство пользователя

Страница: 25 / 40

ENGLISH
settinGs
• date-time
• lanGuaGe
• set deGrees
See chapter: commiSSioning SettingS.
dISPLAY
This menu allows you to adjust the brightness of the display. The values range from OFF, 1 to 20. if set to OFF, the display backlighting is set
to maximum brightness and then, turns off after a 60 second delay.
The backlighting can be turned on again by pressing any key or if the stove is in alarm status.
CONTrOLs PrOCeDUre
Š
Press key 6.
Š
Press 3 until SETTINGS appears and confirm by pressing 6.
Š Press key 3 until
dISPLAY
appears and confirm by pressing key 6.
Š
Use keys 4 and 5 to set the brightness ( SET )
Š
Press key 6 to confirm and key 1 to return to the previous menus to the initial state.
STANd - BY
The STANd-BY function, if enabled, is used to turn the stove via an additional thermostat.
CONTrOLs PrOCeDUre
Š
- Press key 6.
Š
- Press key 3 until SETTINGS appears and confirm by pressing key 6.
Š - Continue by pressing key 3 until
STANd-BY
appears and confirm by pressing key 6.
Š
- Use keys 4 and 5 for enabling ( ON ) / disabling ( OFF ).
Š
- Press key 1 several times to confirm and exit the menu.
FIRST LOAd
This function allows to fill the auger, facilitating the phases of the first start-up of the stove, or in the event that the pellet tank is empty.
with the stove cold and "OFF", make sure the pellet has been introduced inside the tank and activate the FIRST LOAd function, confirming
with OK.
To interrupt continuous loading, simply press key 1 for 3 seconds.
CONTrOLs PrOCeDUre
Š
Press key 6.
Š
Press key 3 until SETTINGS appears and confirm by pressing key 6.
Š Press key 3 until
FIRST LOAd
appears and confirm by pressing key 6.
Š
Use keys 4 and 5 for enabling “ON” or disabling “OFF”
Š
Press key one several times to confirm and exit the menu.
25