Extraflame 001282600, Руководство пользователя

Страница: 17 / 40

OFF
1 2
3
4
5
6
1
2 3
4
5
6
1 2
3
4
6
5
6
ENGLISH
OFF
1 2
3
4
5
6
1
2 3
4
5
6
1 2
3
4
6
5
6
General menu
go back - exit
scroll parameters: next (2); previous (3)
modify data settings: increase (4); decrease (5)
Confirm - access menu
The company has an optional additional board that allows the appliance the following further functions when managing the
system. The table below indicates the various possibilities that the optional can offer.
Contact the dealer for further details The connection must be made by a qualified technician directly on the board.
DHw storage management
p
Buffer Tank management
p
3 heating areas
p
instant DHw option
p
Buffer tank pump or 4th heating area management
p
anti-legionella management for DHw storage
p
DHw storage chrono management
p
auxiliary output management and control
p
BasiC instruCtions
The following recommendations must be followed the first times
the stove is ignited:
Š
it is possible that slight odours are produced due to the drying
of the paints and silicone used. Do not remain in the room for long
periods.
Š Do not touch the surfaces as they could still be unstable.
Š Ventilate the room well several times.
Š
The hardening of surfaces will stop after several heating cycles.
Š
This appliance must not be used to burn waste.
Before lighting the stove, the following points must be checked:
Š
The hydraulic system must be completed in compliance with
regulatory guidelines and the instructions in the manual.
Š
The hopper must be full of pellets
Š The combustion chamber must be clean
Š The burn pot must be completely free and clean
Š Check the hermetic closure of the fire door and the ash drawer
Š
Check that the power cable is properly connected
Š
The bipolar switch in the rear right part must be positioned on 1.
EASY SETUP
CHRONO ENABLING
PRG1
PRG2
SETTINGS dATE-TImE PRG3
LANGUAGE PRG4
dISPLAY
STANd-BY
FIRST LOAd
OUTLET AIR
dEGREES
RESET
*TeCHNiCiaNs ONLY
*STOVE STATUS
*TECH mENU
17