Extraflame 001282600, Руководство пользователя

Страница: 19 / 40

ENGLISH
CommissioninG settinGs
Once the power cable at the back of the stove has been connected, move the switch, also located on the back, to (I).
The switch at the back of the stove powers the stove board.
The stove remains off and a first screen appears on the panel reading OFF .
line frequenCy 50/ 60hz
if the generator is installed in a country with a frequency of 60Hz, the display will show "POwer FreQ. errOr ".
Change the frequency as described below.
CONTrOLs PrOCeDUre
Š
Press the 6 key
Š select the frequency required with keys 4 or 5.
Š Press key 6 to confirm and key 1 to return to the previous menus to the initial state.
date-time
This menu allows the date and time to be set.
CONTrOLs PrOCeDUre
Š
Press key 6.
Š Press 3 until
SETTINGS
appears and confirm by pressing 6.
Š
Confirm dATE-TImE by pressing 6 and using 4 and 5 to set the day.
Š
Continue by pressing 6.
Š
Use the same procedure with 4 or 5 to choose the setting and 6 to move continue, to set the hour, minutes, date, month and year.
Š Press key 6 to confirm and key 1 to return to the previous menus to the initial state.
LANGUAGE
This menu allows the preferred language to be selected.
The languages available are: italiano - english - german - French - spanish - Portuguese
CONTrOLs PrOCeDUre
Š
Press key 6.
Š
Press 3 until SETTINGS appears and confirm by pressing 6.
Š Press 3 until
LANGUAGE
appears and confirm by pressing 6.
Š select the language with keys 4 or 5.
Š
Press key 6 to confirm and key 1 to return to the previous menus to the initial state.
dEGREES
This menu allows you to set the temperature unit of measurement. The value is preset to °C.
CONTrOLs PrOCeDUre
Š Press key 6.
Š
Press 3 until SETTINGS appears and confirm by pressing 6.
Š
Press 3 until dEGREES appears and confirm by pressing 6.
Š
Use keys 4 and 5 to select Celsius or Fahrenheit.
Š Press key 6 to confirm and key 1 to return to the previous menus to the initial state.
J
no iGnition
the applianCe may fail to liGht BeCause the auGer is empty and not always aBle to load the Burn
pot with the neCessary quantity of pellets in time to reGularly iGnite the flame. if the proBlem
oCCurs after only a few months of operation, CheCk that the routine CleaninG desCriBed in the
stove Booklet has Been Carried out CorreCtly.
19