background image

ENGLISH

AddITIONAL wARNINGs

 

Š

Only use the fuel recommended by the manufacturer. The product must not be used as an incinerator.

 

Š

Do not use the product as a ladder or supporting structure.

 

Š

Do not place laundry on the product to dry it. Any clothes-horse or similar objects must be kept at due distance from the product. 

Danger of fire or damage to the coating.

 

Š

The user is fully liable for any incorrect use of the product. The manufacturer bears no civil or criminal liability for incorrect use.

 

Š

Unauthorised tampering of any nature or replacement of spare parts of the product with non-original parts may endanger the operator 

and the manufacturer bears no civil or criminal liability for this.

 

Š

Large parts of the surface of the product can get very hot (door, handle, glass, smoke outlet pipes, etc.). Please therefore avoid coming 

into contact with these parts without wearing suitable protective clothing or using appropriate measures, such as heat protective gloves. 

 

Š

DO NOT use the product with the door open or if the glass is broken.

 

Š

The product must be electrically connected to a system equipped with an operational earthing system.

 

Š

Turn off the product in the event of a failure or malfunctioning.

 

Š

Unburned pellets that build up in the burner following each failed start-up must be removed before attempting to start up the product 

again. Make sure that the burner is clean and correctly positioned before starting it up again.

 

Š

Do not wash the product with water. Water may penetrate into the unit and cause faults in the electrical insulation. This can cause 

electric shocks.

 

Š

Installations not complying with the regulations in force, as well as incorrect use and failure to comply with the maintenance scheduled 

by the manufacturer, will invalidate the guarantee.

37

Содержание 001282600









































Отзывы: