- 56 -
7 Operating instructions
M e d i z i n i s c h e
L a b o r d i a g n o s t i k a
A G
EUROIMMUN
7.4.4 During the test run (Start, Pause, Stop)
If you have created a worklist as described in chapter 7.3 you can start as
follows:
To start the worklist, press the
Start
button. Following a brief
initialisation phase, the
Sprinter XL
starts processing the worklist.
Before you start a worklist, ensure that the instrument cover is closed.
A bar diagram (Gantt diagram) is shown of the worklist scheduling at the top of
the window. A red vertical line shows the current time and displays the step
that is being performed.
Figure 7-56:
Worklist status
To obtain detailed information on the next or previously processed steps, press
on the
Time Schedule
tab.
You can pause a worklist at any time by pressing the
Stop
button.
The system immediately interrupts processing and the following
message appears:
Figure 7-57: Pause
The instrument is in Pause mode. Select
No
if you wish to continue with
processing. Select
Yes
to cancel the worklist.
You may not continue a worklist after cancellation! After cancelling and
continuing, it is possible that the instrument skips processing steps.
THEREFORE, THIS MUST BE AVOIDED!
Start
Status
Pause
