7 Operating instructions
- 35 -
M e d i z i n i s c h e
L a b o r d i a g n o s t i k a
A G
EUROIMMUN
If necessary, press the arrow button to display the position numbers
(tube) in ascending order.
Further steps are as described in chapter 7.3.4 unless a worklist was imported.
In this case, proceed directly to chapter 7.4.
7.3.4 Editing
a
worklist
This section describes how to select tests and dilutions for samples.
Click on
Methods
to select the tests which should be performed.
The
Methods Selection
window opens. Left-click on the appropriate box of the
tests which should be performed. The tests are automatically added to the
worklist after closing the window with
OK
.
Figure 7-18:
Methods Selection
Select the samples for the tests by left-clicking on the appropriate field. It is
also possible to make a multiple selection including adjacent fields. To do this,
select the first field, hold down the left mouse button and drag the mouse over
the fields which you would like to select. Once all of the fields to be selected
are marked, release the mouse button again. The selected fields turn yellow.
Selecting a test
Selecting
samples
