U2829 Series Operation Manual Chapter 4 [SYSTEM] and [FILE]
50
4.2.2
U-disk manage performance
As described above, U2829 has a standard configuration of USB HOST interface,
so the external U-disk can be used as the memory media. In this condition, it
breaks the memory limit of 100 groups of *.LCR files. Meanwhile those files can
be copied to IBM PC or compatible desk-top computer, laptop with USB interface
to reach the infinite extension.
U2829 supports the USB memory devices as below:
Meet the USB 1.0/1.1 standard
Capacity: 32MB/64MB/128MB/256MB
File format: FAT32(Format the USB memory on Microsoft Windows operation
system)
4.2.3
Operation steps for file management
A.
Search an existed file
1)
Roll the knob to view one by one.
2)
Use the [
←
] and [
→
] to view one page by one page.
3)
Press the soft key
SEARCH
. Input the file name and then press the
[ENTER] to search the target file.
B.
Save the following control and setting parameters to a file by the
following steps
1)
Select and set all control and setting parameters on the desired page.
2)
Press [
FILE
] key, the following soft keys will be displayed.
LOAD
SAVE
DELETE
COPY
SEARCH
EXT
3)
In the file list, move the cursor to the file-saved position or input the file
number directly.
4)
Press
SAVE
, the following soft keys will be displayed.
Yes
No
5)
Press
No
to cancel the current save operation and return step 2.
6)
Press
Yes
, and “
☺
：
Input LCR file name
：
” will displayed
7)
Use numeric keys to input the current file name and press [ENTER]. Then
U2829 will save the control and setting parameters as a file in this name.
C.
Load the control and setting parameters from a file by the following
steps
1)
Press [File] key, the file list and the following soft keys will be displayed.
LOAD
