Page 52
When Custom Region is selected, the vessel color will change from light
orange to green, thus alerting the User that this is a special graphing
Mode. When Custom Region is selected, the User can select/deselect a
subset of individual wells with the mouse as desired. Normally, when a
graph is generated, it is automatically assigned a Label based upon the
selected Region and Statistic. Because in this case the Region is variable,
it is possible for the User to assign a custom Label. If the Label box is not
populated, the default Label will simply read Custom Region
accompanied by the Statistic.
To save a custom region for later use, click the “Save” button to the right
of the Label box. The custom region will then be saved under the Region
pull-down menu for the current vessel type. To delete a saved custom
region, select it from the Region pull-down menu and click the “X” next
to the Region box. The selected region will then appear as a Custom
Region, giving the option to edit it or permanently delete it (by choosing
a different saved region).
NOTE:
If a plate map is associated with a vessel (microplates only), any
Region created in the Plate Map Editor will be available for graphing. To
create a plate map or assign regions, see Section 7.9.
Graphing Flasks and Dishes
Flasks and Dishes contain only two possible regions:
All Sectors
Single Sector
Region All Sectors
If All Sectors are selected, the graphs can be viewed with or without error
bars, and the error bars will represent the inter-sector Mean or Median as
selected in the Statistic drop-down menu.
All: All the sectors within the flask will be combined into a single trace.
None: any of the sectors will be grouped. No error bars are available for
graphs of single sectors.
Region Single Sector
If the Region Single Sector is selected, a new drop-down menu will appear.
Choose the desired sector for graphing. Error bars are not available for
graphs of a single sector.
