ESPEC BTL-433, Инструкция по эксплуатации

Страница: 7 / 60

Precautions
3. Ignitable Substances
•
Ethyl ether, gasoline, acetaldehyde, propylene oxide, carbon disulfide and other
substances with an ignition point of –30°C (-22°F).
•
Normal hexane, ethylene oxide, acetone, benzene, methyl ethyl ketone and other
substances with an ignition point above –30°C (-22°F) and below 0°C (32°F).
•
Methanol, ethanol, xylene, pentyl acetate amylacetate and other substances with an
ignition point above 0°C (32°F) and below 30°C (85°F).
•
Kerosene, light oil, turpentine oil, isopentyl alcohol (also called isoamyl alcohol),
acetic acid and other substances with an ignition point above 30°C (85°F) and below
65°C (150°F).
4. Combustible Gases
Hydrogen, acetylene, ethylene, methane, ethane, propane, butane and other
combustible substances that are in a gaseous state at a temperature of 15°C (60°F) and
at a pressure of 1 atmosphere.
!
CAUTION
•
DO NOT introduce corrosive substances into the equipment.
Humidifying water or specimens which generate substances that corrode stainless steel or
silicone rubber can drastically shorten service-life of internal parts, including the evaporator
and packing.
5. Corrosive Substances
Corrosive substances include, but are not limited to, chlorine, chlorides and acids. Though
apparently harmless at ambient temperature, these substances can readily corrode circuit
boards, stainless steel and other parts when the equipment is run at high temperature and
high humidity.
Damage to the equipment by prohibited substances is not covered by the Espec warranty.
1.2. KEEP OUT of the Chamber
!
DANGER
•
TRAPPED! NEVER climb inside the chamber.
The door cannot be opened from the inside, if locked from the outside.