Esko Kongsberg XE10, Руководство пользователя

Страница: 46 / 133

9
Kongsberg XE
9.3 Board Setup
Position the material for the job on the table.
Select Board Size from the Board Size drop down list.
Note : Board size information is used for calculating Step & Repeat. If Step & Repeat is not
used, this setup is optional.
9.4 Open an input file
From File View , open Input Files in one of following ways:
Double click on a file.
Select a file and click the Open button.
Click on a file, hold the left mouse button down, drag the file into Job View and
release it.
When
Auto Open is enabled and activated the files will be opened
automatically (204).
The Input File formats available are:
File extension Description
.acm Kongsberg acm – format. This is the default input format for Kongsberg XN.
Described in the Technical Reference manual for XN.
.plt HPGL. Described in the Technical Reference manual for XN.
.dxf DXF. See Appendix about DXF input tuning (214).
.ard ArtiosCAD. See Appendix about the ArtiosCAD module CAD-X (214).
.cf2 CFF2. See Appendix about the ArtiosCAD module CAD-X (214).
.ddes DDES. See Appendix about the ArtiosCAD module CAD-X (214).
The format is selected from the System Setup dialog (81). Standard file extensions will be
automatically recognized.
46