Esko Kongsberg XE10, Руководство пользователя

Страница: 60 / 133

11
Kongsberg XE
11.8 Set Ruler Position
Main Menu->Options->Table Option->Set Ruler position
If your table is equipped with Rulers , please complete the wizard for Left and Right Ruler .
For the table to operate properly an exact registration of the Ruler Positions is necessary. This
is a one time job, but it can be necessary to repeat the procedure if mechanical maintenance
has been carried out on the table or traverse.
Correct registration of the Right Ruler is required when Reverse Operations are carried out.
Procedure:
• Press the Set Ruler Position button.
• Follow the instruction given by the wizard and define the left ruler position.
• Repeat the procedure for the right ruler.
11.9 Set Table Top Reference
Main Menu -> Options -> Table Option -> Set Table Top Reference
Use this function to complete a Tool Height Reference calibration.
The Tool Height is measured in current position and the reference to the table top surface is
updated.
The
Table Top Reference function should be carried out:
• After mechanical adjustments of traverse or tool head.
• When cutting through material is not working properly.
• After any change of cutting / milling underlay, for instance, after adding or removing the
milling underlay.
Procedure:
1. Remove all materials from the table surface.
2. The cutting underlay remains in place.
3. If the table is equipped with a conveyor belt, avoid measuring directly on the belt junction.
4. Execute the Table Top Reference function.
5. In the wizard, press OK to start measurement.
60