Esko Kongsberg XE10, Руководство пользователя

Страница: 45 / 133

9
Kongsberg XE
9. Prepare for a Job
9.1 Introduction
Keep away from Moving Parts during operation.
Do not lean on Racks , Guide Ways or Traverse during operation, as this may
cause personal injury.
Before starting any operation, make sure that:
• The Table is free from obstructions
• No unauthorized personnel come close to the table
The Starting Point in this procedure is:
• Xx-Guide and table are up and running.
• Properly adjusted tools are mounted.
Use this chapter as a check – list when changing from one job to another.
9.2 Job Setup
Job Setup is a table that links Logical tool numbers (P - numbers) in the Input File to physical
tools on the machine and describes their behavior (87).
The Job Setup information is stored as a file on the front end PC. Select Job Setup file from the
Job Setup drop down list.
45