ESCO Technologies ETS-Lindgren EMControl 7006-001, Руководство пользователя

Страница: 86 / 91

86 EMControl Command Set ets-lindgren.com
*WAI
Description: Wait to Continue. Causes the controller to place execution of the
next GPIB command on hold while there are devices in motion.
Once motion has ceased, the next command is executed
normally. While a command is on hold, additional commands are
not accepted. Normal operation will continue after the command
on hold had been executed.
Time out of the GPIB bus must be disabled before execution of
*WAI command. The *OPC commands are a more
program-friendly method of waiting for device motion to stop.
Devices: Turntables, towers
Syntax: *WAI
Response: no response, or an error (error number)
Example: Write sd*WAI\n : Wait for tower motion to stop
See Also: *OPC?