Ericsson EDACS PRISM HP, Руководство оператора

Страница: 59 / 108

the status is selected and will be transmitted to the site
or stored in the radio memory where it can be polled by
the site at a future time. Status messages can also be
programmed for single key operation so that a single
press of a key assigned to a status message automat-
ically transmits that message. If the site does not receive
the status properly, the radio will sound a low pitched
tone.
The status selection can also be canceled by press-
ing the CLEAR button prior to the time-out period.
To view the currently selected status after it has been
transmitted, press the
M
key and then the
<
key to
ramp to STS, re-press the
M
key again and then the
CLEAR button prior to the time-out period. If the status
was not sent successfully to the site, the text associated
with the status will flash in the display.
MESSAGE OPERATION
Message operation is performed in the same manner
as status operation in previous paragraph.
DYNAMIC REGROUP OPERATION
Dynamic group operation permits multiple talk groups
(up to eight) to be added to a radio via the system
manager. The radio must be pre-programmed to re-
spond to regrouping. Dynamic regrouping will not be
activated in a radio until an activation message is sent
by the system manager. Each radio that receives and
acknowledges the regrouping instructions is success-
fully regrouped.
59