Ericsson EDACS PRISM HP, Руководство оператора

Страница: 42 / 108

3.
While the current status is displayed, press
A
until the group from the scan list is “blank”. The
sequence is “blank”, “S”, “2” ,“1”, “blank”. Any group
that is not in a trunked system group scan list will
show a “blank” for the time-out period when it is the
selected channel.
Nuisance Delete
A group can also be deleted from the scan list, if it is
not the currently selected group, by pressing
A
key
during scan operation while the radio is displaying the
unwanted group. The group will be deleted from the
system’s group scan list in the same manner as if done
using the steps above. Deletions done in this manner will
not remain deleted if the radio is turned off and then back
on.
SYSTEM Radio
Adding Groups To A Scan List
1. With scan operation turned off, select the desired
group to add to the selected trunked system group
scan list.
2. Press
6
. The current priority status of the group
will be displayed in column 1 of line one for a time-out
period (refer to Hidden Status Icons). If the group
is not part of the scan list the status will be blank.
3. While the status is displayed, press
6
to add the
group to the scan list. "S" is displayed on line one.
42