Ericsson EDACS PRISM HP, Руководство оператора

Страница: 107 / 108

Radio Status Icons
Status icons are indicators which show the various
operating characteristics of the radio. The icons show
operating modes and conditions and appear on the third
line of the display as follows:
In trunked mode:
ON - indicates the radio is transmitting
or receiving a call on the working chan-
nel.
FLASHING - indicates a call has been
queued.
In conventional mode:
ON - indicates a call is being received.
ON - indicates the radio is transmitting.
Note: When operating in a trunked sys-
tem, the radio may be programmed to
automatically transmit (without pressing
PTT) to maintain digital communication
with the site controller. The transmit indica-
tor will turn on whenever the radio is trans-
mitting.
ON - indicates the radio is in the special
call select/entry mode (Individual or Tele-
phone Interconnect).
ON - indicates the selected group or chan-
nel is selected to transmit at low power.
OFF - indicates the selected group or
channel is selected to transmit at high
power.
Auto Power mode automatically adjusts
radio output power to optimize battery life.
Indicates battery voltage is getting low.
Note: When or in conjunction with mes-
sage the radio will no longer transmit. The
radio will automatically power down soon
after this condition exists.
- indicates the EDACS is in the failsoft
mode (if enabled through programming).
ON - indicates the group or channel is en-
abled to receive encrypted messages.
FLASHING - indicates an encrypted
transmission is being received.
ON - indicates the scan mode is enabled
(rotates clockwise).
21
20