Ericsson EDACS PRISM HP, Руководство оператора

Страница: 41 / 108

To select a lower priority level, the group must be
deleted from the scan list and then added back to the
scan list. Each new group added to the scan list
starts at the lowest priority. If the priority 1 and Priority
2 groups are already set and a new group is as-
signed as Priority 1 or Priority 2, the previously
assigned group will change to non-priority scanning.
One of the following messages may be momentarily
displayed:
SCAN DIS
The radio is not programmed to scan.
FIXED P1 A Priority 1 group has been pre-pro-
grammed into the radio. A new Priority 1
group cannot be selected.
FIXD LST A fixed scan list has been pre-pro-
grammed into the radio. It is not possible
to change the list without reprogramming
the radio.
Note: To quickly view multiple group scan status,
press
A
then slowly but consistently rotate the
group knob. Each group status will appear on the
display.
Deleting Groups from a Scan List
1. With scan operation turned off, select the desired
group to delete from the selected trunked system
group scan list.
2.
Press
A
. The current status of the group is dis-
played for a time-out period.
41