System Radio:
The following steps are required to dial these num-
bers:
1.
Follow the procedure in Sending A Telephone In-
terconnect Call (Trunked Mode Only) to establish
a connection to the telephone system or consult the
system administrator for the procedure to access a
dial tone on the trunked or conventional system.
2.
Overdial numbers are transmitted using either
method as follows:
METHOD 1: Press and hold PTT while entering the
overdial number sequence from the key-
pad. This method sends DTMF tones dur-
ing individual, telephone interconnect.,
trunked group or conventional channel
calls. Anytime the PTT button is pressed
and held, the keypad is enabled for DTMF
entry.
METHOD 2: Press
*
to enter the overdial select/en-
try mode and follow the selection mode
rules to call up a stored number from the
phone list or to direct enter the overdial
digits.
turns on. Press PTT to send the
overdial sequence once. If the number
needs to be transmitted again it must be
selected or entered again (this prevents
unwanted numbers from being sent the
56
Содержание EDACS PRISM HP
