Product Safety Requirements RBS 2000
For Canada the following standards are applicable:
CAN/CSA-C22.2 No 1-M94 Audio, Video and Similar Electronic
Equipment.
CAN/CSA-C22.2 No 950-95 Safety of information technology
including electrical business equipment.
General
The RBS fulfills encapsulation class IP 55. Additional to this the
product fulfils the environmental requirements.
According to: IEC 529.
This document gives the requirement for the RBS to fulfill the general
safety requirements as follows:
The RBS is so designed and constructed that, under all conditions of
normal use and under a likely fault condition, it protects against
personal injury from electrical shock and other hazards. The RBS is
also protecting against serious fire originating in the equipment,
mechanical hazards in the equipment, as well as mechanical hazards in
the meaning of the applicable standard.
The RBS is connected directly to the Telecommunication network;
hence the equipment must be provided with adequate protection, as
specified in IEC 950 and UL 1950 3rd edition.
•
Protection to ensure compliance with the requirements for TNV
circuits, and protection against electric shock.
•
Protection for the Service Personnel and other users of the
Telecommunication Network from hazards in the equipment.
•
Protection for the equipment users from voltages on the
Telecommunication Network.
•
Protection against overvoltage. (Only applicable for UL 1950 3rd
edition.)
42.2.1
Declaration of Conformity
Tests and inspections are carried out according to ECMA requirements.
286 (306)
EN/LZT 123 2697
R5A
1998-08-13
© Ericsson Radio Systems AB
— All Rights Reserved —
