Product Specification for RBS 2302
Note:
When using integral antennas, cables and connectors are
included. These connection are placed on the cabinet.
Transmission
Twisted pair:
Type of connections:
Screw terminal for 12 x max. 1.5 mm
2
Cable gland capacity:
2 x Ø7-15 mm
Coaxial:
Type of connection:
4 x TNC (receptacle) female
Grounding:
The transmit wire screen is grounded. It is
possible to ground the receive wire screen.
Earthing
Type of connectors:
Central earth terminal point M8 thread
5.7.2
Internal Connections
OMT
Type of connections:
9 pin D-sub (receptacle) female.
Extended OMT-port
Type of connections:
9 pin D-sub female.
Maximum cable length:
50 m
Cable gland capacity:
1 x Ø5-9 mm
5.7.3
Test Interface
The RBS is equipped with test ports for connection of external
instruments. The following signals are available at test ports:
13 MHz Reference
Type of connectors:
SMB connector (receptacle) male.
RTS-PLS Test Port
Type of connectors:
No requirements
5.7.4
Operator Interface
The operator interface is located in the Mounting Base. The interface
includes indicators and buttons, switches and barcode signs. For exact
specification of button and indicator functionality see chapter Operation
& Maintenance Support.
64 (306)
EN/LZT 123 2697
R5A
1998-08-13
© Ericsson Radio Systems AB
— All Rights Reserved —
