EMC Capabilities for RBS 2301
39.3
Capabilities
39.3.1
RBS Description
Hardware
The capabilities are tested for an RBS equipped with a minimum
representative configuration of units. This system is representative of
installed systems in terms of function, which includes at least one of
each function unit type, and electromagnetic radiation characteristics.
The number and types of sub-units are given from results of
investigations in accordance with ETS 300 342-2, Nov 1994.
Software
The capabilities are valid for a standard setup of system software with
default parameters.
Performance
For the immunity capabilities the RBS is operating and will fulfil the
performance criteria stated for each test.
For emission capabilities all equipment in the RBS was enabled during
verification to create the worst emission case.
EMC directive
The EMC capabilities of the RBS fulfills the mandatory requirements
specified in the EMC directive, 89/336/EEC, which gives compliance
for trade in EU member countries.
Generic Standards
The following generic standards are fulfilled by the system:
EN 50 081–1, Jan 1992 Emission
EN 50 082–1, Jan 1992 Immunity
39.3.2
Conducted Emission
Table 28
Voltage fluctuation on AC power supply leads
Basic standard
IEC 1000-3-3
Limit
Set by Table II in IEC 1000-3-3
Table 29
Harmonics on AC power supply leads
Basic standard
IEC 1000-3-2
Limit
Set by Table 1 in IEC 1000-3-2
Table 30
Interference on AC power supply leads
Basic standard
EN 55 022
Limit
Class B
258 (306)
EN/LZT 123 2697
R5A
1998-08-13
© Ericsson Radio Systems AB
— All Rights Reserved —
