Quadro Manual II: Administrator's Guide
Extension User's Menus
QuadroFXO (SW Version 3.0.x)
68
Call Handling
Fig. III-6 Call Handling menu in Dynamo Theme
Fig. III-7 Call Handling menu in Plain Theme
Supplementary Services
The
Supplementary Services
page provides a possibility to configure a set of telephony settings from the same page. Call Forwarding, Incoming
and Outgoing Call Blocking Settings, Call Hunting settings are configurable from this page.
The
Supplementary Services
page contains a table where
all caller or called destinations and the states (ON or OFF)
of supplementary services for each of them are listed.
Caller or called destinations are used to configure
supplementary services based on them. The column
headings of the table are designed as links. By clicking on
the column heading the table will be sorted by the selected
column. Upon sorting (ascending or descending) arrows
will be displayed close to the column heading.
The table also has
Any Address
entry that is undeletable.
It is used to configure supplementary services for all
addressed. When adding a new caller address
Any
Address
is changed to
Other Addresses
. Now there could
be different configurations for the specified addresses and
for all others.
Fig. 3-8 Supplementary Services page
Add
opens the
Supplementary Services
-
Add Entry
page where a new address can be defined.
Page consists
of the following components:
The
Description
text field requires optional information
about the address owner.
Call Type
lists the available call types:
•
PBX - local Quadro extensions and Auto Attendant
•
SIP – caller or called destinations reached through
a SIP server
•
PSTN – caller or called destination dialed from or to
PSTN
•
Auto – used for undefined call types. In this case,
for incoming calls from specific address,
configuration of supplementary services will apply
either to PBX, SIP or PSTN callers. For outgoing
calls, the called destination will be reached through
Routing.
Fig. 3-9 Supplementary Services – Add Entry page
