QuadroFXO Manual II: Administrator's Guide
Administrator's Menus
QuadroFXO (SW Version 3.0.x)
37
Calling Phone
and
Called Phone
respectively
require the caller and called party’s SIP address (see chapter
Entering a SIP Addresses correctly
extension or PSTN number as search criteria. Wildcard symbols are allowed here.
The
Call Statistics: Successful Calls, Missed Calls and NonSuccessful Calls
tables are lists of successful, missed and unsuccessful incoming
and outgoing calls and their parameters (Call Start Time, Call Duration, Call destinations). Each column heading in the tables is a link. By clicking on
the column heading, the table will be sorted by the selected column. Upon sorting (ascending or descending), arrows will be displayed close to the
column heading.
Network Details
column is present in
Successful Calls
table only and provides brief information about the call quality and codecs used for receive
and transmit packets. Clicking on the successful call details will open
page where detailed information about the established call is
provided.
Call Detail
column is present in
Non Successful Calls
table only and indicates the reason of the call being unsuccessful.
Filter
performs a search procedure by the selected criteria. The search may be done with several criteria at once.
To Enable/Disable the Statistics
1.
Enter
the
Call Statistics Settings
page.
2.
Select/deselect
the
Enable Call Reporting
checkbox to enable/disable statistics recording.
3.
If enabling the statistics, the maximum number of records to be stored in the statistics table should be selected from the corresponding drop
down lists.
4.
Press
Save
to apply the new configuration.
To Filter the Statistics
1.
Enter the desired criteria fields.
2.
Press
the
Filter
button to search the call reports within the
Call Statistics
table.
Please Note:
To return to the complete
Statistics Table
clear all search criteria and press
Filter
.
To Reset the Statistics
1.
Press
the
Clear All Records
button in the
Call Statistics Settings
page.
2.
Confirm the deletion with
Yes
. The call statistics will be deleted. To abort the deletion and keep the statistics information, click
No
.
RTP Statistics
The
RTP Statistics
page provides detailed information (Call Quality,
Receive and Transmit Codecs, Number of Packets and Packet Sizes,
Number of Received Lost Packets, Receive Jitter and Receive
Maximum Delay) about the established call is provided.
Below is the legend for Call Quality definitions on the displayed RTP
Statistics:
excellent
- lost packets <= 1% & max_arrival_delay <= 100 ms
good
- lost packets <= 5% & max_arrival_delay <= 200 ms
satisfactory
- lost packets <= 10% & max_arrival_delay <= 400 ms
bad
- lost packets <= 20% & max_arrival_delay <= 600 ms
very
bad - lost packets > 20% or max_arrival_delay > 600 ms
Fig. II-56: RTP Statistics page
