Epson Stylus COLOR 1160, Руководство по обслуживанию, Страница: 147 / 189

EPSON Stylus COLOR 860/1160 Revision C
Adjustment PF Loop scale unit assembling procedure 147
5.3 PF Loop scale unit assembling procedure
This section describes how to assemble the following parts
o
PF Loop scale
o
Base plate
o
Double side adhesive tape
o
Gear 76
This assembling procedure is required when the following parts is
replaced.
n
Gear 76
n
Loop Scale
For this assembling, following tool is required.
Table 5-1 Required Assembling Tool
5.3.1 Assembling the PF Loop scale unit
This section describes how to assemble the following parts.
o
PF Loop scale
o
Base plate
o
Adhesive Tape
1. Set the AS Tool # 1051765 as following figure
2. Peel off the protection tape from the Base plate and set it on the AS
Tool # 1051765. The adhesive side should be faced to upward.
Figure 5-53. Setting the Base plate on the AS Tool # 1051765
No. Assembling Item assembling parts Required tool
1 Scale PF unit
Assembling tool Stick the Loop scale
unit to the Gear 76 AS Tool code: 1051767
2 Mounting Plate scale
Attachment tool Stick the Loop scale to
the base plat AS Tool cod: 1051765
Base plate
AS Tool
#1051765
Protection tape
Adhesive side