8. Other Functions
S5U1C17001Y23 Multi-Programmer
Seiko Epson Corporation
25
System Manual (Rev. 1.1)
8.4 Configuration
Clicking on the [Configuration] button opens the [Configurations] dialog box allowing the user to specify the
saving location and name of log file, and a time-out condition.
Figure 8.4.1 [Configuration] Button
Figure 8.4.2 [Configurations] Dialog Box
•
Folder
Specify the folder where log files are to be saved in the [Folder] field. When entering a path to the folder, it
must begin with the drive name. It can also be specified using a folder select dialog box that appears by clicking
on the [Browse] button.
•
Header
Enter the leading characters of log files in the [Header] field. This field can be left blank. With the leading
characters added, the log file appears as follows:
[Header]YYYYMMDD.txt
If “LOG” is specified in [Header] and the current date is June 30, 2014, the file name is as follows:
LOG20140630.txt
The Folder and Header settings will take effect from the next time Gang Writer starts up.
•
Time out
Enter the time-out time from the beginning of programming (from erasing) in the [Time out] field. (The default
value is 600 seconds.) If data to be programmed is large, a long time-out should be set. Enter a value that allows
a sufficient margin. (Setting to 3 seconds or less will always cause an error.)
