Epson PP-100NII, Руководство пользователя

Страница: 90 / 194

90
Publishing Discs
Loading discs
Follow the steps below to load discs in the stacker and insert it.
1
Fully separate the discs to prevent them from sticking together.
2 Take out the input stacker and load the discs into it.
The stacker to use as the input stacker differs depending on the set Publish Mode. Confirm the input stacker
in the following table.
Load the discs in a stacker. Do not load discs in the drives or printer. Furthermore, do not load
discs between Drive 1 and Drive 2. They may become unable to be taken out.
•
Be sufficiently careful not to scratch a disc.
•
If a long time elapses after discs are loaded in the stacker, the separated discs may stick
together again. Fan the discs again if a long time has elapsed since they were loaded.
Do not replenish or remove discs while the stacker is attached to this product. Be sure to
remove the stacker beforehand.
Publish Mode
Input
Stacker
Number of Discs
Standard Mode Stacker 1 Up to approximately 50 discs
External Output Mode
(Different types of discs can be loaded into Stacker 1 and
Stacker 2.)
Stacker 1 Up to approximately 50 discs
Stacker 2 Up to approximately 50 discs
Batch Mode
Stacker 1 Up to approximately 50 discs
Stacker 2 Up to approximately 50 discs
Place the label surface facing upwards.