Epson ET-2830 Series, Руководство пользователя

Страница: 80 / 169

If you do not know where the [WPS] button is, or there are no buttons on the wireless router, see the
documentation provided with your wireless router for details.
2. Hold down the button on the printer for at least five seconds until the light and the light flash
alternately.
The connection setting will start. When a connection is established, the light turns on.
Note:
The printer is in a connection error status when the light and the light flash simultaneously. After clearing
the printer error by pressing the button on the printer, reboot the wireless router, place it close to the printer and try
again. If it still does not work, print a network connection report and check the solution.
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can connect to an wireless router by using a PIN code that is printed on the network status sheet. You can use
this method to set up if an wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a
PIN code into the wireless router.
1. Load papers.
2. Hold down the button on the printer for at least 5 seconds.
The network status sheet is printed.
Note:
If you release the button within 5 seconds, a network connection report is printed. Note that PIN code information
is not printed on this report.
3. While holding down the button, press the button until the light and the light flash
alternately.
In These Situations
>
Re-Setting the Network Connection
>
Making Wi-Fi Settings from the Control Panel
80