Epson EMP-7300, Руководство по обслуживанию

Страница: 70 / 110

3-5
REV.A
3.2 DISASSEMBLING THE MAIN UNIT
The flowchart for disassembling the main unit is shown below. You can take same
disassembling procedure for EMP-7300. Since you can reassemble the dismantled
parts in the reverse order of disassembly, unless specifically specified, this manual
contains no reassembly procedure. Detailed descriptions of the disassembly
procedures are given in Subsections 3.2.1 through 3.2.20.
Paragraph 3.2.19 to 3.2.20 are reference only, do not disassemble
Figure3- 1 Disassembly flow chart
Prism duct/
LV Thermister
(3.2.12)
Air filter frame
(3.2.2)
Upper case Unit
(3.2.3)
Foot adjuster
(3.2.16)
Lamp Thermister
(3.2.11)
START
Lamp inner
housing (3.2.1)
Safety Switch
(3.2.13)
Optical engine
(3.2.14)
CD10DR head
(3.2.17)
FC board
(3.2.18)
Projection lens
unit
(3.2.19)
Cooling fan/Exhaust fan/
optical head unit/
Left guide unit
(3.2.20)
Power supply
unit/PBS
Thermister
(3.2.15)
Rear case unit
(3.2.9)
CD10MA board
(3.2.8)
CD10AJ/MJ/PJ/VJ
board(3.2.10)
Switch Panel
(3.2.4)
Speaker (L/R)
(3.2.5)
CD10AU board
(3.2.6)
Receptor BD
(3.2.7)