Epson EMP-7300, Руководство по обслуживанию

Страница: 46 / 110

2-17
REV.A
2.7 CD10MJ BOARD
CD10MJ board includes the board for connecting a remote control receiver and the
mouse / serial interfaces of a host computer. The electric current control resistance
and the noise filter circuit are only installed on the board. CD10MA board controls
switching and other things.
CN 101 (Mouse / Com 1) and CN 102 (Mouse / Com 2) are multi-mouse connectors. If
the ELP communication kit 2 option is installed on the host computer and cables are
connected to them, host computer control is available from remote controller. The
controller on the CD10MA board automatically determines the interface operation
mode to apply the proper circuit to them.
The optional remote control receiver can be connected to the receptor interface (J
101).The receiver provides the same functions as the standard receptor board (FI / RI
board). Without the receiver the remote controller is enabled to use within the limited
area in front and rear. The receiver expands the controllable range for the remote
controller.
Figure2- 20 CD10MJ board
Figure2- 21 CD10MJ board